• White Facebook Icon
  • White Instagram Icon
  • YouTube - White Circle
  • White Pinterest Icon
Monday                 10.00 am   to  2:00 pm 
Tuesday - Friday       10.00 am   to  4:00 pm 
Saturday                 10:30 am   to  2:30 pm
Sunday                  CLOSED
CALL TO BOOK AN APPOINTMENT: 
Monday -- Saturday  9:00am to 7:30pm               
Phone: (02) 9310 7998
Fax:     (02) 9310 1845
9/112 McEvoy Street,
Alexandria NSW 2015

Mapei Products for Ceramic and Stone Materials

For enquiries on our products feel free to contact us on (02) 9310 7998 or email us at tiziana@tilebox.com.au

Levelling Compounds

UC LEVELLER

Fast hardening levelling smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping.
UC Leveller is used for levelling and smoothing of new or existing substrates and it readies them for receiving any type of textile flooring in areas where resistance to heavy loads and traffic is needed along with an especially smooth surface. 
UC Leveller can be used in interiors in thicknesses from 3 to 70 mm only. 


Application examples:
Smoothing concrete slabs and cement-based screeds.
Smoothing anhydrite screeds.
Smoothing for under-floor heating installations. 
Smoothing over existing ceramic tile, terrazzo, natural stone and magnesite floors. 


Technical Data:
Consistency: fine powder
Colour: Grey 
Ready for traffic: 12 hours
Packaging: 20kg bag

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds.
 

Technical Data
Set to light foot traffic: after 2-3 hours.
Consumption: 20 kg/m ² per cm of thickness.
Packaging: 20 kg bags.

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings.
Applications:
Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles. Suitable for applying in thin coats on all conventional surfaces (concrete, cement-lime mortar, cementitious mortar, etc.). To improve bonding or consistency of thin coats, add 1 or 2 kg of Planicrete per bag.


Technical data
Applications: on walls only.
Colours: grey and white.
Consumption
1.4 kg/m2 per mm of thickness.
Packaging
25 kg bags.

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications.
Applications:
Interior levelling of all types of substrates normally found in the building industry provided they are clean and not subject to moisture, such as concrete slabs and walls, masonry, renders and cementitious screeds, etc. Also suitable for existing floors and walls, natural stone and terrazzo floors. Suitable for repairing or levelling steps, edges of pillars, landings and arrises of floors, walls and soffits.


Technical data
Set to light foot traffic: approximately 2 hours.
Colour: grey.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
20 kg bags

NOVOPLAN 21

Fast hardening self-levelling smoothing compound for thicknesses up to 10 mm.


Where to use:
• Smoothing in interiors of new and existing substrates, including heating screeds, to prepare them for the installation of PVC, rubber and carpet flooring.
• Smoothing existing ceramic tile, terrazzo and natural stone flooring, as long as it is solid, dry and clean.
Novoplan 21 is applied from 1 to 10 mm per coat and is suitable for wheelchair traffic.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
20 kg bags.

ULTRAPLAN

Ultra-fast hardening self-levelling compound.

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content.
Applications:
Interior levelling of new and existing substrates, as long as not subject to moisture, to make them suitable for receiving all types of flooring where high resistance to loads and traffic is required. Levelling existing floors provided they are solid, dry and clean.
Ultraplan Eco is applied up to 10 mm thick per layer by trowel or pump.

Technical data
Set to light foot traffic: approximately 3 hours.
Colour: pinkish grey.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
20 kg bags.

ULTRAPLAN MAXI

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 30 mm.
Applications:
Interior levelling of new and existing substrates to make them suitable for receiving all types of flooring where high mechanical strength is required.
Levelling existing floors provided they are solid, dry and clean.
Ultraplan Maxi is applied from 3 to 30 mm thick per layer by trowel or pump.


Technical data
Set to light foot traffic: approximately 3 hours.
Colour: grey.
Consumption
1.7 kg/m2 per mm of thickness.
Packaging
20 kg bags.